BabyLock.com - Sewing Machines
Follow us on Twitter Subscribe to Baby Lock enewsletter Login to Profile
Baby LockBaby Lock ProductsBaby Lock ProjectsSew At HomeInside ScoopBaby Lock EventsBaby Lock DownloadsBaby Lock Where To Buy
Machines
Find your perfect machine with Match Maker
Other Products
Customer Care
Downloads


print friendly Print-friendly version  
Palette PTS Update
Version Windows 2000 Service Pack 3 Update  Added: 10/9/2002

Baby Lock PTS Owners Software Update "Only" for Windows 2000 with Service Pack 3 or 4. If you would like to use Baby Lock Palette PTS on Windows 2000 with Service Pack 3 or 4, you may need to upgrade the driver for Baby Lock Palette PTS to eliminate the possibility of a PC lock-up. (Caution) If you are not using the Service Pack 3 or 4 for your Windows 2000 now, or if you are not going to use the Service Pack 3 or 4 for your Windows 2000 in the future, you do not need to install this updated program to Baby Lock Palette PTS.


Instructions for download:
Follow the instructions below before downloading the software.

Instructions to download to your hard drive.
  1. Print and follow the instructions to load the update.
  2. Download file, saving it to your hard drive.
  3. Locate the saved file on your hard drive.
  4. Double click on the file.

PTS Ver.1.0 for Windows 2000 with Service Pack 3 or 4 Owner

Software Update for PTS Ver.1.0

If you would like to use PTS Version 1.0 on Windows 2000 with Service Pack 3 or 4, you need to upgrade the driver for PTS to match to the Windows' update.
(Caution) If you are not using the Service Pack 3 or 4 for your Windows 2000 now, or if you are not going to use the Service Pack 3 or 4 for your Windows 2000 in the future, you don't need to apply this updated program to your PTS Version 1.0.
Update for the Windows 2000 with Service Pack 3 or 4


Software Update for PTS Ver.1.0 on Windows 2000 with Service Pack 3 or 4 Operating System



There are three different procedures according to your condition.

Please select your condition listed below.

Case 1: The PTS Ver.1.0 has already been installed in your Windows 2000. And you are about to install Service Pack 3 or 4 to your Windows 2000.

Case 2: Service Pack 3 or 4 for windows 2000 has already been installed. And you are about to install the PTS Ver.1.0.

Case 3: Both PTS Ver.1.0 and Service Pack 3 or 4 for Windows 2000 have already been installed to your PC. And now you cannot boot the Windows 2000 correctly.


Case 1: The PTS Ver.1.0 has already been installed in your Windows 2000. And you are about to install Service Pack 3 or 4 to your Windows 2000.

Step 1: Download the updated program to your PC (hard drive)
  1. Make a temporary folder on your hard drive to save the update program file to be downloaded. (Ex. c:/temp)
  2. Click the "DOWNLOAD FILE" link below.
  3. Select the temporary folder where the downloaded file should be stored. (Ex. c:/temp)
  4. Download the file.

Step 2: Update the Card Reader/Writer module hardware driver and install the revised PTS program to your PC.

  1. To decompress it, double click on the downloaded file "ptsPatchForW2KSP3.exe" in Explorer, or click [Start] on the Task Bar, choose [Run], type [ptsPatchForW2KSP3.exe] and then press the OK button. (Ex. c:/temp/ptsPatchForW2KSP3.exe)
  2. Confirm the correct connection with the USB Card Reader/Writer module.
  3. Double click on the file "Setup.exe" in Explorer, or click [Start] on the Task Bar, choose [Run], type [Setup.exe] and then press the OK button. "Setup.exe" exists on the temporary folder that you made at above Step 1. (Ex. c:/temp/ Setup.exe)
  4. Follow every step to the end of the installation program.

Step 3: Install the Service Pack 3 or 4 to your Windows 2000.

Now, you can install the Service Pack 3 or 4 of Windows 2000 to your PC.



Case 2: Service Pack 3 or 4 for windows 2000 has already been installed. And you are about to install the PTS Ver.1.0.

Step 1: Download the updated program to your PC (hard drive)
  1. Make a temporary folder on your hard drive to save the update program file to be downloaded. (Ex. c:/temp)
  2. Click the "DOWNLOAD FILE" link below.
  3. Select the temporary folder where the downloaded file should be stored. (Ex. c:/temp)
  4. Download the file.


Step 2: Install the revised driver for the Card Reader/Writer

  1. To decompress it, double click on the downloaded file "ptsPatchForW2KSP3.exe" in Explorer, or click [Start] on the Task Bar, choose [Run], type [ptsPatchForW2KSP3.exe] and then press the OK button. (Ex. c:/temp/ptsPatchForW2KSP3.exe)
  2. Connect the USB Card Reader/Writer module to your PC. Then the "Hardware Wizard will be launched automatically.
  3. Click the "Next"" button in the dialog box.
  4. Choose the "Search for a suitable driver for my device [recommended]" and Click the "Next" button.
  5. Check the "Specify a location" box and uncheck the others and click the "Next" button.
  6. Input or select the temporary folder name that you made at the above Step 1 (Ex. c:/temp) and click OK.
  7. Continue every step to the end of the Hardware Wizard.

Step 3: Install the PTS Ver.1.0 to your PC (Windows 2000).

Now, you can put the PTS Ver.1.0 CD to your drive, and install it to your PC.

Step 4: Install the revised PTS program to your PC.

  1. Double click on the file "Setup.exe" on the temporary folder in Explorer, or click [Start] on the Task Bar, choose [Run], type [Setup.exe] and then press the OK button. "Setup.exe" exists on the temporary folder that you made at above Step2. (Ex. c:/temp/ Setup.exe)
  2. Continue every step to the end of the installation program.

Case 3: Both PTS Ver.1.0 and Service Pack 3 or 4 for Windows 2000 have already been installed to your PC. And now you cannot boot the Windows 2000 correctly.

Step 1: Recover from the problem that Windows 2000 with Service Pack 3 or 4 locks up.
  1. Boot your PC and select the "Safe mode" for Windows.
  2. Double click on the "My Computer" on the Desktop
  3. Right click on "C:" drive.
  4. Select "Search" menu from the popup menu list.
  5. Input "windrvr.sys" as a file name to search.
  6. Click on the "Search" button.
  7. Right click on the found "windrvr.sys" file.
  8. Select "Delete" menu from the popup menu list.
  9. Click the "Yes" button in the message box.
  10. Reboot your PC as "Normal mode".

Step 2: Download the updated program to your hard drive

  1. Make a temporary folder on your hard drive to save the update program file to be downloaded. (Ex. c:/temp)
  2. Click the "DOWNLOAD FILE" link below.
  3. Select the temporary folder where the downloaded file should be stored. (Ex. c:/temp)
  4. Download the file.

Step 3: Update the Card Reader/Writer module hardware driver and install the revised PTS program to your PC.

  1. To decompress it, double click on the downloaded file "ptsPatchForW2KSP3.exe" in Explorer, or click [Start] on the Task Bar, choose [Run], type [ptsPatchForW2KSP3.exe] and then press the OK button. (Ex. c:/temp/ptsPatchForW2KSP3.exe)
  2. Confirm the correct connection with USB Card Reader/Writer module.
  3. Double click on the file "Setup.exe" in Explorer, or click [Start] on the Task Bar, choose [Run], type [Setup.exe] and then press the OK button. "Setup.exe" exists on the temporary folder that you made at above Step 2. (Ex. c:/temp/ Setup.exe)
  4. Follow every step to the end of the installation program.



Palette PTS Update
Download Now  (Filesize: 1.44 MB)




get adobe reader    PDF documents require the FREE Adobe reader.
Click Here to download Adobe Reader