Burlap often gets short shifted as a fabric. When beautifully stitched with embroidered lettering though it makes for a pretty and rustic piece. This embroidered burlap project can be completed in a short time and adds a touch of country charm to any room. Download printable instructions.
Materials:
- 1 Yard of Burlap
- 1 Yard of solid colored fabric for backing on the burlap
- Positioning Stickers
- Madeira® Embroidery Thread
- Baby Lock Cut-Away Fusible Appliqué Stabilizer
- Baby Lock Tear-Away Stabilizer
- 12” x 12” mat with picture frame
- Stapler w/staples
- Chalko Marker
Tools:
- Baby Lock® Unity Spirit or Journey Sewing and Embroidery Machine
Steps:
-
Setup the machine for embroidery and click Embroidery category. Click on the font icon. From the list of fonts click on the third font as shown below.
-
Using uppercase and large size lettering for this line type in the word “BABY ”
-
Before you type in the comma select the number tab as shown below with the red arrow.
-
To type in multiple lines click on the Arrow key to advance to the next line.
-
Type in “It’s Cold.”
-
Use uppercase and lowercase letters for this line.
-
Click on the Arrow key again to advance to the third line.
-
Type in the word “Outside” using uppercase and lowercase lettering.
-
-
Apply the Fusible Appliqué Stabilizer to the front side of a 16” x 16” section from the backing fabric following the manufacturers’ directions.
-
Remove the fabric from the stabilizer and place a 16” x 16” piece of the burlap fabric over the fused fabric and press to secure.
-
This will give a solid background that will hold all of the stitches securely.
-
Determine the center on the fabric sandwich and place a Positioning Sticker.
-
-
Hoop the tear-away stabilizer in the 200mm x 200mm hoop and spray with the temporary spray adhesive.
-
Place the burlap sandwich in the center of the hoop and finger press to secure.
-
-
Embroider the design using black embroidery thread.
-
Remove the embroidered section from the hoop.
-
Setup the machine for sewing and change the embroidery foot with the Digital Dual Feed foot.
-
Select a candlewicking stitch from the Decorative Stitches category.
-
Using a Chalko marking pen to draw 2 lines; the first will be 1” above the first row of embroidered words and the other 1” below the last line.
-
-
Stitch over the marked lines at a slow even pace using the black embroidery thread.
-
Keep the marked line positioned down the center of the presser foot.
-
-
To frame the embroidery place the embroidered fabric center over the mat. Pull the fabric to the back side of the mat and staple in place.