Whip up this fun glasses case in no time with a Baby Lock serger!

Materials:

• 4 Spools Madeira® Aerolock serger thread
• Soft or medium weight fabric: Two pieces – 8.5” length x 8” width
• Fusible Interfacing: One piece – 8.5” x 8”

Tools:

• Baby Lock® serger

Steps:

1. Fuse interfacing to one layer of fabric. Set Imagine serger up for a 4-thread Overlock stitch.

2. Take the two pieces of fabric and place them pretty sides together. Serge the two layers along the top edge (one of the 8” sides).

3. Open up the 2 layers and press the seam down flat in between the 2 layers.

4. Fold in half, pretty sides together. Serge the long side. Then, serge the lower edge.

5. Tie knots on all three serger thread corners. Clip close to the knots and turn right side out. Done!